Electronic Components Business
Jumper wire for printed circuit board (Tin-plated copper wire)
It is used for jumping electricity by shorting the copper wire on the printed circuit board.
| code | Wire diameter | Plating thickness | Plating material |
|---|---|---|---|
| NSL-TA | 0.2～2.0mm | 1～4μm | Sn 99.85% (conforming to BS EN 610 standard) |
Lead wire for electronic component (Pb free solder plated copper wire)
It is used as a lead part for resistors, capacitors and others. Suitable plating thickness is secured for the purpose of processing deterioration countermeasure at the time of parts manufacture and for preliminary soldering when being soldered to the board.
| code | Wire diameter | Plating thickness | Plating material |
|---|---|---|---|
| NSL-S,NSL-SH,NSL-H | 0.2～2.0mm | 2～8μm | Pb free solder Sn 99.3 Cu 0.7 (1.5% ± 1%) |
Wire business
Conductor for electric wire (tin-plated copper wire)
It is used for the core wire (conductor part) of electric wire. Determine the wire diameter and composition according to the allowable current and the environment in which the wire is used.
| code | Wire diameter | Plating thickness | Plating material |
|---|---|---|---|
| TA | 0.3～100mm2 The wire size is 0.12 - 0.8 mm | 1μm below | Sn 99.85% (conforming to BS EN 610 standard) |
Braid copper wire (tin-plated copper wire)
It is mainly used for shielding effect to prevent noise from the outside as braiding material for electric wires.
| code | Wire diameter | Plating thickness | Plating material |
|---|---|---|---|
| TA | 0.12～0.18mm | 1μm below | Sn 99.85% (conforming to BS EN 610 standard) |
New development project
In order to respond to customer's request, we are conducting sample production aiming for mass production.
